Instrument Features
1. Built-in dedicated Ni-H rechargeable battery pack with large capacity, capable of testing up to 300 times after full charge.
2. Short test interval (about 1 second), and it does not extend with battery depletion.
3. Output has three adjustable levels: high, medium, and low, suitable for verifying the operation of lightning counters of different types and brands.
4. Rechargeable, completely eliminating the hassle of frequent battery replacement or damage caused by battery leakage.
5. Portable design, small size, light weight, easy to carry.
6. Discharge function: after high-voltage charging, if not used for two minutes, the high voltage is automatically released.
7. Strong universality, suitable for various types of lightning counters.
8. Telescopic electrode can be adjusted in length. Strong anti-interference capability.
Technical Parameters
Action time: 1~2 seconds/time
LCD display: 9V Dimensions: 200×115×45mm
Usage Instructions
1. Please charge before use. To ensure charging effectiveness and extend battery life, use the dedicated charger. It takes about 3-4 hours to fully charge an empty battery. The red light on the charger indicates charging is in progress.
2. According to the installation height of the counter, properly extend the telescopic discharge rod.
3. For the dedicated grounding wire, insert one end's plug into the jack at the rear of the calibrator, and connect the other end's clip to the earth.
4. Press the red button to turn on high voltage for about 1 second. When the indicator light lights up (with a slight flicker), gently tap the connection point between the counter and the arrester for testing.
5. After each tap, the discharge rod tip should be moved away from the counter. If repeated testing is needed, do not release the button. Wait 1-2 seconds until the indicator light flickers again, then tap again for testing.
6. Continuous testing may cause the calibrator to heat up. Please allow appropriate intervals to reduce faults and extend battery life.
7. The calibrator output has three levels: high, medium, and low, adjustable via the toggle switch on the head to suit testing different types or brands of counters.
8. If the indicator light does not flicker after pressing the button for more than 3 seconds, the battery needs charging.
9. Do not disassemble the calibrator arbitrarily. If the battery pack capacity significantly drops or charging efficiency is too low, it needs replacement. Please purchase a dedicated battery pack from our factory.
.jpg)
