Yangzhou Darui             GDBN-012Cable Path Tester                                            



 







  Introduction

      





I. Functional Features:




  1. This path signal source, when used with a path detection receiver, can reliably detect the route and burial depth of various types of cables.


  2. Due to the use of intermittent amplitude-modulated 15kHz sinusoidal signals, when detecting the path and burial depth of buried cables, it can effectively suppress power frequency interference and the same-frequency interference from TV horizontal frequency (15625Hz), greatly improving field detection efficiency.


  3. Due to the amplitude modulation technology, this signal source is not only suitable for traditional beat-type receivers but also for direct-amplification voltage-doubling detection path receivers.


  4. The high-power output signal of this signal source can enable the detection of cable paths up to 10Km or more, fully meeting the requirements of various ultra-long cables laid in most domestic enterprises.


  5.  



II. Technical Specifications:




  1. Output Power:  Pomax ≥100W


  2. Operating Frequency:  15kHz


  3. Operating Mode:     Intermittent


  4. Output Impedance:   Zo=Zc (Cable characteristic impedance)


  5. Power Supply:   AC 220V  ±10%


  6. Environmental Conditions:   Temperature -20 to +50 degrees Celsius, humidity less than 95%


  7. Dimensions:   380mm × 280mm × 260mm


  8. Weight:   12kg