TAG-8000 Wireless High-Voltage Phase Verifier is an advanced power detection device, mainly used for phase verification of power sources on both sides of circuit breakers at the closing point of loop networks or dual-power power networks in power systems. It ensures phase consistency between the two power sources before closing operation, preventing short circuit accidents that may be caused by phase differences.
Main Functions and Features
Wireless Phase Verification and Phase Sequence Detection: Achieves long-distance phase comparison through wireless technology, without physical connections, improving operational safety and flexibility.
High-Voltage Detection: Equipped with voltage detection function to check whether the target circuit is energized.
Phase and Frequency Measurement: Capable of measuring and displaying the phase and frequency of the tested line.
Strong Anti-Interference: Complies with EMC standards and can operate in various electromagnetic environments.
Wide Applicability: Suitable for phase verification on transmission lines from 6kV to 220kV.
Intelligent Operation: Fully intelligent device that automatically identifies voltage levels and supports wireless voice prompts.
Usage Precautions
Ensure the instrument is fully charged before use to avoid weak battery affecting signal reception.
Keep within effective receiving distance during operation and avoid obstacles blocking signals.
Avoid simultaneous use with other radio transmitting devices to prevent interference.
Operators must wear insulating equipment and maintain a safe distance.
Follow the operation manual when using the instrument to ensure correct usage and avoid misoperation.
Basic Usage Method
Turn on the host and transmitters (X rod and Y rod), and check battery status.
Place the X rod and Y rod on the two power sources to be tested respectively.
Observe the indicators on the host screen to confirm whether signals from X and Y rods are received.
Determine phase difference and in-phase/out-of-phase conditions based on screen display.
Pay attention to the battery voltage indicator on the host screen and replace or charge batteries in time.
Technical Parameters
Supported voltage levels: 10V~550kV, automatic gear shifting.
Equipped with phase, frequency, and phase sequence testing functions.
Anti-interference capability complies with EMC standards.
The above information is synthesized from multiple sources; specific usage details may vary depending on product model or version. Refer to the latest manual provided with the product.
